Telecomunicações wan

This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNA Exploration: Accessing the WAN course as part of an official Cisco Networking Academy Program.

Lab 1.4.1: Challenge Review Lab
Topology Diagram

Addressing Table Device Interface
Fa0/1 Fa0/1.10 R1 Fa0/1.12 Fa0/1.13 S0/0/0 Fa0/1 Fa0/1.12 R2 Fa0/1.20 S0/0/0 S0/0/1 R3 Fa0/1

IP Address
N/A 192.168.10.1 10.12.12.1 10.13.13.1 10.1.1.1 N/A 10.12.12.2 192.168.20.1 10.1.1.2 10.2.2.1 N/A

Subnet Mask
N/A 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.252 N/A 255.255.255.0 255.255.255.0 255.255.255.252 255.255.255.252 N/A

Default Gateway
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 4

CCNA Exploration Accessing the WAN: Exploration 2 &3 Review

Lab 1.4.1: Challenge Review

Fa0/1.13 Fa0/1.30 S0/0/1 S1 S2 S3 PC1 PC3 VLAN10 VLAN20 VLAN30 NIC NIC

10.13.13.3 192.168.30.1 10.2.2.2 192.168.10.2 192.168.20.2 192.168.30.2 192.168.10.10 192.168.30.10

255.255.255.0 255.255.255.0 255.255.255.252 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0

N/A N/A N/A 192.168.10.1 192.168.20.1 192.168.30.1 192.168.10.1 192.168.30.1

Learning Objectives
To complete this lab: • • • • • • • • • • Cable a network according to the topology diagram Erase the startup configuration and reload a router to the default state Perform basic configuration tasks on a router Configure and activate interfaces Configure Spanning Tree Protocol Configure VTP servers and client Configure VLANS on the switches Configure RIP routing on all the routers Configure OSPF routing on all routers Configure EIGRP routing on all the routers

Scenario
In this lab, you will review basic routing and switching concepts. Try to do as much on your