Vantege

Vantage Pro®, Vantage Pro2TM and Vantage Vue® Serial Communication Reference Manual
For Vantage Pro, Vantage Pro2, Vantage Pro Plus, Vantage Pro2 Plus and Vantage Vue Weather Stations

Davis Instruments Corp.

Vantage Pro, Vantage Pro2, and Vantage Vue Serial Communication Reference Manual Rev 2.5 (07/30/2012) Davis Instruments Part Number: 07395.801 © Davis Instruments Corp. 2012. All rights reserved. Note: This document will be periodically updated along with our product development. Please check Davis Instruments’ website (www.davisnet.com) for the latest version. Vantage Pro is a registered trademark of Davis Instruments Corp. Vantage Pro2 is a registered trademark of Davis Instruments Corp. Vantage Vue is a registered trademark of Davis Instruments Corp.

Davis Instruments Corp.
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. 510-732-9229 • Fax: [phone] E-mail: [e-mail] • www.davisnet.com

Page 2 of 59

Revision History Revision 2.3.0 2.5.0 Date February 9, 2009 July 30, 2012 Changes 1. Fix default value errors in the document 1. Add section for new command “LPS” to support new loop packet type 2. Add section for web download protocol 3. Added section to document Vue EEPOM layout. 4. Added references to the Vantage Vue product as appropriate.

Page 3 of 59

Table of Contents I. Introduction ............................................................................................................................................. 5 II. Additonal Commands Not in Monitor II ................................................................................................ 5 III. Differences between Vantage Pro and Vantage Pro 2 .......................................................................... 6 IV. Differences between Vantage Pro 2 and Vantage Vue ......................................................................... 6 V. Waking up the Console