Sony aibo - guia básico do usuário

35334 palavras 142 páginas
2-657-983-11 (1)

Printed in Japan © 2005 Sony Corporation

* 2 6 5 7 9 8 3 1 1 * (1)

For Customers in the U.S.A.
Safety Information
Owner’s Record
The model number and serial number are located on the wall of the robot’s battery compartment and on the side of the supplied AC adapter. Record the serial number in the space provided below. Refer to the model and serial number whenever you call upon your Sony®
AIBO® Customer Link (for customer support).
Model No. ERS-7
Serial No. ________________

Warning
• To reduce fire or shock hazard, do not expose the robot to rain or moisture.
• To avoid electrical shock, do not disassemble the robot. Refer servicing to qualified personnel only. (Contact the AIBO Customer
Link (for customer support).) (page 5)
• Periodically examine the AC adapter for conditions that may result in the risk of fire, electrical shock, or injury to persons (such as damage to the cords, blades, housing) and in the event of such conditions, the AC adapter should not be used until properly repaired or replaced. • Not intended for children under 8 years old.

Regulatory Information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning
• You are cautioned that any changes or modifications not expressly approved in this

2

manual could void your authority to operate this equipment.
• The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.

Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable

Relacionados

  • Guerra fria
    3321 palavras | 14 páginas
  • Tendencias da engenharia de produção no seculo XXI
    4379 palavras | 18 páginas
  • Tecnologia em processos de automação, robótica e fms.
    14829 palavras | 60 páginas
  • Robótica
    14119 palavras | 57 páginas
  • Exemplo TCC
    66145 palavras | 265 páginas