Placa ci microcontrolador 4433

PowerLogic™ Ethernet Gateways

SAFETY PRECAUTIONS

INTRODUCTION Box Contents • G3200 unit and connectors • Installation guide Additional Resources
Documentation: PowerLogic G3200 Modbus-to-IEC61850 Server user’s manual To download it: 1. 2. 3. 4. 5. 6. Go to www.schneider-electric.com Type G3200 in the Search field. Select the PowerLogic G3200 product range. On the PowerLogic G3200 product range page, click Downloads. On the Downloads page, click Tech.Publications Click on the User Guide or the Instruction Sheet you want to download.

DESCRIPTION
1. 24 V DC control power terminal block connection 2. Ethernet 10/100BaseTx RJ45 connection 3. LEDs: Ethernet: • LK: Active link • TX: Transmitting data • RX: Receiving data • 100: Link speed. 100 Mb = ON, 10 Mb = OFF Serial: • RS485: RS485 mode = ON, RS232 mode = OFF • TX: Transmitting data • RX: Receiving data Power/Status 4. 5. 6. 7. 8. DIN rail release Reset button RS485 terminal block connection Dip switches RS232 RJ45 connection
TOP

INSTALLATION Dimensions mm in
65,8 2.59

PowerLogic G3200 (ref. 59655) Modbus-to-IEC 61850 Server
Installation Guide
63230-216-319A1 12/2010

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Only qualified personnel should install this equipment. Such work should be performed only after reading this entire set of instructions. • NEVER work alone. • Turn off all power supplying this equipment before working on or inside it. • Always use a properly rated voltage sensing device to confirm that all power is off. • Before performing visual inspections, tests, or maintenance on this equipment, disconnect all sources of electric power. Assume that all circuits are live until they have been completely de-energized, tested and tagged. Pay particular attention to the design of the power system. Consider all sources of power, including the possibility of backfeeding. • Beware of potential hazards, wear personal protective equipment and carefully inspect the work area