Parker - instrument pipe & iso conversion fittings

16340 palavras 66 páginas
Exibir mais
Instrument Pipe & ISO Conversion Fittings
Catalog 4260 February 2010

Introduction
Instrument Pipe Fittings Introduction
Parker Instrumentation Pipe Fittings are designed as leak-free connections for process, power, instrumentation and general plumbing applications. They are manufactured to the highest quality standards and are available in broad ranges of sizes, materials and configurations. Parker Instrumentation Pipe fittings are made at the Instrumentation Connectors Division of Parker Hannifin in Huntsville, Alabama where strict adherence to quality control programs are maintained. These quality standards are incorporated in a total efficiency program called Parker Targets. The Parker Targets Program is a measure of the efficiency with which the company transforms materials, employee efforts, machinery and information into customer-satisfying products and services. Consequently, Instrumentation Pipe fittings as products of Parker Targets effectively guarantee to customers that they are receiving the highest quality fittings available.

Catalog 4260

ISO Conversion Fittings Introduction
Parker ISO Conversion Fittings are designed to the highest quality standards to allow connections between components and systems which use both NPT and ISO Thread configurations. Conversion fittings are maintained under strict quality control programs.

Design

Parker ISO Conversion Fittings are designed to the most commonly used ISO thread forms. These thread forms are used where pressure tight joints are either made on threads utilizing a thread sealant or where pressure tight joints utilize a peripheral seal on the face of the mating component.

Material

Parker ISO Conversion Fittings are standard in stainless steel and brass. Other materials may be special ordered within the Parker Quick Response Department. Straight fittings are manufactured from applicable ASTM bar stock specifications shaped fittings are manufactured from close grain forgings.

Relacionados

  • Evans
    158528 palavras | 635 páginas

    Substitution and new technology These two factors may both lead to a diminution in demand. We have already seen great changes such as the development of longerlasting car batteries that use less lead, substitution of copper and plastic for lead water pipes, and a change to lead-free petrol; all factors that have contributed to a downturn in the demand for lead (Fig. 1.3). Decisions taken by OPEC in 1973 affected all metals (Figs 1.1–1.3). They led to huge increases in the prices of oil and other fuels….

    exibir mais
  • Mecanica
    106861 palavras | 428 páginas

    systems are used. The key to clean SI engines is a three-way catalytic converter (TWC) system whose stationary conversion efficiency is depicted in Fig. 1.6. Only for a very narrow air/fuel ratio “window,” whose mean value is slightly below the stoichiometric level, can all three pollutant species present in the exhaust 1.3 Overview of SI Engine Control Problems 9 Fig. 1.6. Conversion efficiency of a TWC (after light-off, stationary behavior). gas be almost completely converted to the innocuous….

    exibir mais
  • Perry
    75409 palavras | 302 páginas

    represent more than one property. The appropriate meaning should be apparent from the context. The equations given in Sec. 15 reflect the use of the SI or cgs system of units and not ft-lb-s units, unless otherwise noted in the text. The gravitational conversion factor gc needed to use ft-lb-s units is not included in the equations. Symbol a ap aw bij A A Acol Adow Ai,j/RT Ao C CAi C* CD Co Ct d dC di dm do dp d32 Dcol Deq Dh Di Di Dsm Dt D DAB E E′ E Definition Interfacial area per unit volume Specific….

    exibir mais

Outros Trabalhos Populares