Análise solidedge simulation
574 palavras
3 páginas
Simulation ReportCompany
Author wrarruda Date segunda-feira, 20 de junho de 2011
Software Used
Solid Edge ST(103.00.04.05)
Femap (10.1.1)
Solver Used
NX Nastran (7)
[pic]
Table of Contents 1. Introduction 2. Model Information 3. Study Properties 4. Study Geometry 5. Material Properties 6. Loads 7. Constraints 8. Connectors 9. Mesh Information 10. Results 11. Conclusion 12. Disclaimer
[pic]
1. Introduction
[pic]
2. Model Information
|Document |U:\Asm3.asm |
[pic]
3. Study Properties
|Study Property |Value |
|Study name |Static Study 1 |
|Study Type |Linear Static |
|Mesh Type |Tetrahedral |
|Iterative Solver |On |
|NX Nastran Geometry Check |On |
|NX Nastran command line | |
|NX Nastran study options | |
|NX Nastran generated options | |
|NX Nastran default options | |
|Surface results only option |On |
| | |
[pic]
4. Study Geometry
4.1 Solids
|Solid Name |Material |Mass |Volume |Weight |
| | | | | |
|Part1.par:2 |Steel |0,000 kg |0,000 mm^3 |0,000 mN |
|Part1.par:1 |Steel |
|Density |7833,000 kg/m^3 |
|Coef. of Thermal Exp. |0,0000 /C |
|Thermal Conductivity |0,032 kW/m-C |
|Specific Heat