Manual tp link

How to upgrade TP-LINK Wireless N device
Notice:

Please verify the hardware version of your device for the firmware ver sion.Wrong firmware upgrading may damage your device and void the warranty.



After you downloaded the firmware from TP-LINK website, please use decompression software such as WinZIP or WinRAR to extract the firmware file to a folder;

   

Do NOT upgrade the firmware via wireless connection; Do NOT turn off the power or cut down the Ethernet cable during upgrade process; Please write down all current settings as a backup and enter them manually after upgrading. Internet Explorer(IE) is recommended to upgrade the firmware.

Step 1 Log into the TP-LINK device by typing http://192.168.1.1 in the address bar of the web browser (such as Internet Explorer, Firefox). The UserName and Password are both admin unless you have changed it before.

Step 2 Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.

Step 3 Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes. Step 4 Click Status, verify that the router’s firmware has been upgraded.

Step 5 It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tools->Factory Defaults, Click Restore Button.

Step 6 After restoring factory default, please login http://192.168.1.1 and re-enter the settings you have written down before upgrading.